Snowdon Wooden Bus Shelter
An enclosed shelter suitable for higher traffic locations, bus inter-changes and exposed locations.
A 30 degree, pitched roof shelter, with gabled ends, the underside of the roof is an open void. The single opening shown is 2030mm wide.
The openings can be on any side (or end) giving a single point of access. Alternatively several access points can be created (at any point) by omitting the horizontal rails and glazing.
A bench seat runs the full length of the rear wall; it could be put in any position. Any area of glazing can be swapped for solid boarding and vice versa.
The front of the shelter has no glazing at all. A seat can be fitted as an optional extra and the open ends allow a good view of the approaching bus.
Timber Bus Shelter Specs
Shelter size -
3.120m long x 1.630m deep
Roof Size -
3.60m long x 2.0m deep
|Expected life span||50 + years (except glazing)|
|Timber||FSC® certified Piquia (from fully sustainable sources)|
|Shelter Guarantee||5 years against being burnt down or kicked in (see Guarantees page)|
|Glazing Guarantee||12 months on optional 15mm toughened glass (see Guarantees page)|
|Delivery||Delivered with a crane lorry as a fully finished item|
|Technical drawings||Available on request, by post or PDF or AutoCAD formats|
|Glazing||6.4mm laminated as standard; heavy duty glass / polycarbonate available|
For more information about our bus shelters, please contact Andy and Norma Robinson direct on: